GuideStart Up

Pengecekan MCE Telkom

admin
November 12, 2020 0 Comments

===============Pengecekan PE VPN (Cisco)===============

  1. PE-D2-FR-VPN#sho run int gi0/0/1/6.3866  –> Melihat configurasi interface
  2. PE-D2-FR-VPN#sho arp vrf nama_vrf gi0/0/1/6.3866 –> Cek status ARP (address resolution protocol)
  3. PE-D2-FR-VPN#ping vrf nama_vrf 10.1.1.2  size 1000 r 50 source 10.1.253.4 –> ping menggunakan beban, repeat dan source ip
  4. PE-D2-FR-VPN# traceroute vrf nama_vrf  10.1.1.2 source 10.1.253.49 –> tracert menggunakan source ip di int pelanggan.
  5. PE-D2-FR-VPN# sh ip ro vrf nama_vrf | in 0/0/1/6.3866  –> cek statik routing ip yang di advertise
  6. PE-D2-FR-VPN#  sho bgp vrf nama_vrf summ | in ip ce –> cek routing bgp

===============Pengecekan PE Astinet / Transit (Huawei)==============

  1. PE2-D2-FR-TRANSIT# display curr interface Gi4/0/9.37 –>  Cek interface pelanggan
  2. PE2-D2-FR-TRANSIT# display arp interface  Gi4/0/9.37 –> Cek ARP arah CE
  3. PE2-D2-FR-TRANSIT# display ip routing-table vpn-instance Astinet_Mix 36.x.x.x –> Cari interface berdasarkan IP Public
  4. PE2-D2-FR-TRANSIT# ping -c 10 -s 1000 -a 36.92.222.100 -vpn-instance Astinet_Mix 8.8.8.8 –> Ping -c untuk count atau perulangan, -s untuk size atau beban, -a untuk source ip.
  5. PE2-D2-FR-TRANSIT# tracer  -a 36.92.222.100 -vpn-instance Astinet_Mix 8.8.8.8 –> untuk tracert ip ke backhaul dari pe cabang, atau tracert ke internet via ip di interface.
  6. PE2-D2-FR-TRANSIT# disp bgp vpnv4 vpn-instance Astinet_Global routing-table (IP_CE) –> Cek BGP Astinet Global
  7. PE2-D2-FR-TRANSIT# disp bgp vpnv4 vpn-instance Astinet_Domestik peer (IP_CE) verbose –> cek BGP Astinet Domestik

===============Pengecekan Metro Alcatel (NOKIA)===============

  1. show service sap-using | match 5/1/59:3515 –> Cek cari vcid berdasarkan interface trunk dari PE dan vlan
  2. show service id 650789 base –> Pengecekan VCID pelanggan
  3. Pengecekan service type metro Epipe untuk point to point (PTP), dan VPLS untuk point to multipoint (PTMP)
  4. Cek Bandwidth di metro bisa menggunan show service sap-using | match 5/1/59:3515

hasil jika, setelah vcid ingress / egress ber isi kode di awali

11 untuk satuan bandwidth kbps

12 untuk satuan bandwidth mbps

13 untuk satuan bandwidth gbps

14 untuk service corporate VVIP

1 di loss atau tanpa qos

contoh 12100 –> 100 Mbps,  11512 512Kbps

  1. Pengecekan SAP dan SDP

SAP (Service Akses Point) SDP (Service Distribution Point)

di Metro 1 setelah PE, SAP menuju ke arah PE dan SDP menuju Metro ke 2 / metro lawan

di Metro 2 SAP port menujut lastmile GPON / Switch, sedangkan SDP menuju metro 1.

===============Pengecekan Metro Huawei ===============

  1. display curr interface Gi8/1/16.3624  –> Pengecekan Interface Pelanggan, mencari vcid dan ip metro lawan
  2. ssh user@172.16.16.1 –> untuk masuk metro ke 2 di dapatkan dari perintah pertama.
  3. display mpls l2vc 1969003624  –>  Command di metro ke 2, untuk mencari interface arah lastmile.
  4. display curr interface Eth-Trunk17 –> mencari ip lastmile interface tanpa vlan

===============Pengecekan GPON ZTE===============

  1. telnet ip gpon via tacac akses –> untuk masuk ke GPON
  2. show vlan (vlan id) –> cek interface by vlan
  3. show gpon onu state gpon-olt_1/14/8:11 –> Cek status modem working / loss / offline
  4. show gpon onu detail-info gpon-onu_1/14/8:11 –> Cek profile layanan lengkap dan log modem.
  5. show mac vlan (vlan id) –> Cek mac address by vlan
  6. show pon power attenuation gpon-onu_1/14/8:11 –> Cek redaman ont
  7. sh running-config interface gpon-onu_1/14/8:11 –> Cek configurasi bandwidth di gpon
  8. show onu running config gpon-onu_1/14/8:11   –> Cek vlan di tag di port lan berapa
  9. show gpon remote-onu interface eth gpon-onu_1/14/8:11 –>  Cek status LAN yg aktif / tercolok.

===============Pengecekan GPON HUAWEI===============

  1. GPON00-D1-NGS-2>enable
  2. GPON00-D1-NGS-2#display vlan 3044 à Pengecekan Vlan
  3. GPON00-D1-NGS-2#display mac-address vlan 3044 à Cek Mac address
  4. GPON00-D1-NGS-2#display ont info 0 5 5 27  à Cek Detail Info Gpon
  5. GPON00-D1-NGS-2#display current-configuration ont 0/5/5   27 à cek tag vlan di port gpon
  6. GPON00-D1-NGS-2(config-if-gpon-0/5)#display ont port state 5 27 eth-port all à CEK PORT LAN yang AKTIF DI ONT
  7. GPON00-D1-NGS-2(config-if-gpon-0/5)#display ont optical-info 5 27 >> CEK REDAMAN à Cek Redaman

===============Pengecekan GPON FIBERHOME===============

  1. GPON01-FER# cd onu (ambil dari dir)
  2. GPON01-FER\onu# show  onu service by svlan 3777 –> Cek VLAN
  3. GPON01-FER\onu# show mac_list slot 8 pon 4 onu 10 port 1 –> Cek Mac Address
  4. GPON01-FER\onu# show mac-address vlan 3359 –> Show Mac Adrress
  5. GPON01-FER\onu# show  onu optical-info slot x pon x onu x –> Cek Redaman
  6. GPON01-FER\onu# show onu_state slot 8 pon 5 –> cek status semua onu yg aktif
  7. GPON01-FER\onu# show onu service-info  slot 11 pon 7 onu 11 –> cek configan di port brp
  8. GPON01-FER\onu# show onu state-info slot 8 pon 4 onu 10 –> Cek Log
  9. GPON01-FER\onu# show onu_time slot 8 pon 4 onu 10 –> cek modem sudah hidup berapa lama
  10. GPON01-FER\onu# show onu_state slot 6 pon 5 onu 1 –> cek status modem saat ini
  11. GPON01-FER\onu# show onu slot 4 pon 6 onulist all –> cek semua status modem 1 onu
  12. GPON01-FER\onu# show service_vlan all –> cek all service yg ada di gpon
  13. GPON01-FER\onu# show running-config slot 4 pon 6 onu 10 –> Cek SN Modem
  14. GPON01-FER\onu# show onu_wan_service slot 13 pon 13 onu 3 –> Lihat configurasi WAN, PPPOE

===============Pengecekan Switch Fiberhome===============

  1. PE-D2-FR-MGT# telnet 172.254.16.178 /vrf VRF-SS-OAM –> Masuk sw via ip managment, vrf menyesuaikan yang digunakan.
  2. SW-D2-FERRY# show vlan (vlan id) verbose  | show vlan property –> cek vlan layanan
  3. SW-D2-FERRY# show mac-dynamic vlan 2582 –> cek mac address by vlan

*command di atas bisa di tipe sw Fiberhome Fengine S5800 versi software V210R240, Di tipet FH  S4800 software V210R220 tidak bisa.

  1. SW-D2-FERRY# show running-config  –> Cek configurasi keseluruhan
  2. SW-D2-FERRY# show interface –> Cek interface secara keseluruhan
  3. SW-D2-FERRY# sho interface gigaethernet 1/1 config –> Cek config interface summary

===============Pengecekan Switch Cisco  WS-C3560-48TS ===============

  1. PE-D2-FR-MGT# telnet 172.254.16.178 /vrf VRF-SS-OAM –> Masuk sw via ip managment, vrf menyesuaikan yang digunakan.
  2. SW-D2-CISCO# sho vlan id 1000 –> Cek Vlan layanan
  3. SW-D2-CISCO# show mac-address-table –> Cek mac address keseluruhan
  4. SW-D2-CISCO# show mac-address-table dynamic vlan 996 –> Cek mac address by vlan
  5. SW-D2-CISCO#  show running-config  –> cek configurasi secara kesuluruhan
  6. SW-D2-CISCO# sho runn int Gi 1/1 –> Cek interface Gi 1/1

===============Pengecekan Switch HP  A5120-24G-PoE+===============

  1. PE-D2-FR-MGT# telnet 172.254.16.178 /vrf VRF-SS-OAM –> Masuk sw via ip managment, vrf menyesuaikan yang digunakan.
  2. SW-D2-HP# display vlan 21 –> Cek Vlan layanan
  3. SW-D2-HP# display mac-address vlan 21 –> Cek mac addresss  vlan 21
  4. SW-D2-HP# display curr interface  –> Cek konfigurasi secara keseluruhan
  5. SW-D2-HP# display curr interface gi1/0/6 –> Cek konfigurasi int Gi1/0/6